Description
HOW TO USE
PREPARATION OF THE SUPPORT: the surfaces for which the product is intended ACRIPOL FR must be dry, clean, free from oils, greases and any means that could promote detachment due to poor adhesion; very porous surfaces or those with craters and cavities such as formwork concrete, must be previously smoothed with epoxy cement smoothing compound such as UNICO TRI-EPOXY.
PREPARATION OF THE SUPPORT: pour component B into component A in a 1:2 ratio, then mix at low speed for 4 – 5 minutes with a drill equipped with a propeller/spiral so as to incorporate as little air as possible, also moving the bottom and walls of the bucket well.
APPLICATION: apply in conditions of RH lower than 80%, for outdoor applications do not apply on rainy days and apply only on perfectly dry surfaces with temperatures between 10°C and 30°C, avoiding application on surfaces scorched by the sun. ACRIPOL FR can be applied by airless spray in one or two thin coats, with an average consumption per coat of approximately 80 – 100 g/m² (10-12 m2/kg). Applications with a brush or roller are also possible, for which it is recommended (on poorly absorbent surfaces) to slightly dilute the product with solvent for polyurethane and apply several light coats with short-haired Mohair-type rollers (for polyurethanes), to avoid the formation of unsightly micro-bubbles.
| APPLICATION DATA | |||
|---|---|---|---|
| Pot life at 20°C | 4 hours | ||
| Application | Airless | Dilution | 0-5% Feder 2001 |
| Nozzle diameter | 0.009-0.011 in | ||
| Pressure | 150-180 atm | ||
| Compression ratio | 30 : 1 | ||
| Application | Air spray | Dilution | 10-20% |
| Nozzle diameter | 1.2-1.4 mm | ||
| Pressure | 3-5 atm | ||
| Application | Roller, Brush | Dilution | 0-5% Feder 2001 |
| Hardening times at 20°C – 50% UR |
To the touch | 4-6 hours | |
| Min. oververn. interval | 24 hours | ||
| Max overpainting range | 48 hours | ||
| Chemical resistance | 7 days | ||
USE AND HARDENING TIMES
The working time varies according to the temperature, on average it can be considered
the following report:
Temperature 10°C = POT LIFE 6 hours
Temperature 20°C = POT LIFE 4 hours
Temperature 30°C = POT LIFE 3 hours
TOOL CLEANING
Equipment used for preparation and application can be cleaned with FEDER 2001.
STORAGE
The product has a shelf life of 6 months in the original unopened packaging, stored in a cool, dry environment at a temperature between 10°C and 30°C.