Description
HOW TO USE
PREPARATION OF THE SUPPORT: the substrates to be covered must be sound, dry, free from loose parts, dust, dirt, grease, oil and any other material that could compromise the adhesion of the product to the substrate.
Before carrying out the treatment, it is always necessary to carry out thorough sanding followed by the extraction of the dust produced using an industrial vacuum cleaner in order to guarantee adhesion to the substrate.
PREPARATION OF THE SUPPORT: mix the two components at the moment of use and apply at temperatures from +10°C to +35°C.
Mix the two components separately, then pour the contents of component B into component A and mix the compound with an electric mixer at low speed for a few minutes, until completely mixed. Mix only the quantities that can be used within the maximum workability time.
If you wish to confer to POLYLUX COLOR FR a non-slip finish it is necessary to add, under continuous mixing, the micrometric fillers SAFE STEP R13 at a rate of 5-10% by weight.
APPLICATION: apply POLYLUX COLOR FR no later than 48 hours after the application of epoxy and polyurethane coatings at a temperature of +20°C. Depending on the type of application, the product can be diluted with a specific thinner at a rate of 3-5%. The mixed product can be applied using a short-haired roller or by airless spraying; it is recommended to apply the product in two crossed coats and taking care not to exceed the recommended doses.
In case the surface is damp or there is no vapour barrier, the surface must be treated with approx. 500-1000 g/m2 of UNICO TRIEPOXY, the surface will then need to be primed with a coat of EPOXYLUX AC/F.
INDICATIVE COVERAGE
0.120-0.150 kg /m2 per coat for both glossy and matt finishes, rougher surfaces and lower temperatures increase consumption and lengthen the hardening times of the material.
STORAGE
Storage 12 months, if stored in well-closed containers and in a cool, dry place with a temperature between +5°C and +25°C.
| APPLICATION DATA (At 23°C and 50%U.R.) | |
|---|---|
| Mixing ratio (by weight) | Comp. A : comp. B 1:3 Glossy finish 1:4 satin finish |
| Workability time at +20°C | 2 hours |
| Application temperature | from +10°C to +35°C |
| Setting time | 6-8 hours |
| Walkability | 24 hours |
| Ready for contact with aggressive chemicals | 5 days |
| Colors | On request in RAL colours |
TOOL CLEANING: Equipment used for preparation and application can be cleaned with epoxy thinner.