Description
HOW TO USE
PREPARATION OF THE SUPPORT: OIL BLOCKER is ready to use and does not require dilution.
APPLICATION: on a clean and perfectly dry surface, at most slightly damp, apply with a low pressure airless spray system, it is possible to apply one or two coats depending on the surface porosity, the second coat can be applied “wet on wet” when the first coat has not yet polymerised.
Do not leave excess product on the surface, the oil-repellent protective capacity is obtained after 24/48 hours from application and depending on the quantity of coats of product applied. Drying time depends on atmospheric conditions (temperature, humidity, wind, etc.), do not apply at temperatures below 8°C, on hot surfaces or under direct sunlight. Maximum protection will develop within 4-6 days from application.
ATTENTION
Please ensure you have the latest update of the Technical Data Sheet and the Safety Data Sheet; please read the information contained therein before using the product.
INDICATIVE COVERAGE
Consumption varies according to the porosity of the surface to be treated: on average, 1 litre can be used every 8-10 m2.
STORAGE
The product must be stored in its original, hermetically sealed containers at temperatures between 10°C and 30°C, protected from direct sunlight and in ventilated areas. In these conditions the product has a shelf life of 12 months from the date of the delivery note, if the material is kept for storage beyond the recommended shelf life, it will not necessarily be considered unusable but a prior product check must be carried out.