Description
HOW TO USE
PREPARATION OF THE SUPPORT: before application, make sure the substrate is clean, dry and seasoned (concrete with at least 25 days of maturation), free from grease, grease and contaminating minerals.
PREPARATION OF THE SUPPORT: pour component B into component A in a 1:1 ratio, then mix at low speed for 4/5 minutes incorporating as little air as possible and also moving the bottom and sides of the bucket well. A dilution to 50% with FEDER 1212 may be necessary to treat particularly poorly absorbent surfaces. EPO BD85 must not film on the surface, if this happens dilute further.
APPLICATION: EPO BD85 must be applied in one coat with a roller or brush. The outside temperature must be between 10°C and 40°C with a relative humidity lower than 80%.
INDICATIVE COVERAGE
approx. 40-80 gr/m².
STORAGE
The shelf life of the product is 18 months from the date of the delivery note provided that the material is stored indoors, in the original sealed container, at a maximum temperature of 40°C and protected from heat sources and frost. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics pertaining to the application.