Neutralize pH

Federchemicals > Superfici > Concrete floors > Acidified floors > Neutralize pH

Neutralize pH

ACIDITY CORRECTOR FOR SURFACES TREATED WITH THE ACID COLOR SYSTEM

It is an easy-to-use water-based solution, formulated to rebalance the correct level of alkalinity of the concrete, allowing an optimal level of 8-10 pH to be reached after the use of decorative colored acids. The product is normally applied during the washing phase before and after the use of coloring acids. In the creation of acidified floors, the use of NEUTRALIZE pH allows you to avoid unwanted reactions with any subsequent cycles to be carried out with silicate-based products or protective systems.

 

AVAILABLE FORMATS

DATA SHEET

Description

HOW TO USE

PREPARATION OF THE SUPPORT: NEUTRALIZE Ph It is ready to use and does not require dilution. Shake well before use and keep shaken during the application phases.

APPLICATION: it is recommended to proceed by spraying the product with a plastic pump or by spreading the product on the floor during the washing phase by releasing it from the tank of the single-brush machine.
Allow the product to act for at least 10 minutes, then proceed to wash the surface, remove any residue and rinse with water.

INDICATIVE COVERAGE

Not quantifiable.

STORAGE

The product must be stored in the original containers, hermetically sealed, at temperatures between 5°C and 30°C, protected from direct sunlight and in ventilated areas. In these conditions the product has a shelf life of 12 months from the date of the delivery note, if the material is kept in storage beyond the recommended stability period it will not necessarily be considered unusable but a preventive check on the product must be carried out.

LIMITS OF LIABILITY

Do not release into the environment. In addition to good working practices, before applying the product, it is advisable to read the safety data sheets that are available on our website www.federchemicals.it or upon request to your local dealer, as well as the instructions on the packaging. Do not store the product at temperatures below 10°C. We decline all responsibility for the processing and for damage that may result from improper and incorrect use of the product. The indications we give on the characteristics of the product and the methods of use come from in-depth results of laboratory and technical tests.

However, since it is not possible to produce other elements of judgment when the products are used, these indications must not be considered binding and therefore do not represent a formal guarantee. The user assumes responsibility for the use of the product, taking care to previously test its characteristics. Even partial reproduction of our technical data sheets is prohibited. The data refers to the standards in force at the date of printing 2013. The company reserves the right to change them without notice.

PRODUCT FOR PROFESSIONAL USE

Contacts

Give us a call or fill out the form below and we will get back to you. We strive to respond to all inquiries within 24 hours on business days.
+39 030 3385578
+39 393 8318601