On a flat surface collect as much as possible the sludge or sewage from the processing to be treated, then spread a small amount of product, mix lightly and wait a few minutes for the reaction, after which remove the gel obtained and store in a suitable container. If the liquids are already stored in buckets or wide-mouth containers, add a small amount of product and mix for a short time to improve the dispersion of the absorbent pearls, then wait for the gelling reaction. It is recommended to consider any expansion of the volume after the reaction to avoid leaks from the container. It is recommended to avoid washing the surface for a period of 7 days after the final treatment in order to avoid any unsightly reactions.

APPLICATION: apply the product using a short or medium-haired roller or by spraying. The product can be applied within 1-2 hours, depending on the room temperature.
Apply the product at a temperature between +8°C and +35°C. In closed environments it may be necessary to use hot and dry air to facilitate hardening. Protect the film from water until complete catalysis. Long exposure to UV rays may cause a slight yellowing in the case of light-colored coatings.