Description
HOW TO USE
PREPARATION OF THE SUPPORT: make sure the substrate is clean, dry (cement with at least 25 days of maturation), free from grease, grease and contaminating material.
PREPARATION OF THE SUPPORT: the product must be prepared at the moment of use. Mix the two components separately, then pour the contents of component B into component A and homogenize the mixture with an electric mixer at low speed for a few minutes, until completely homogenized. Mix only the quantities that can be used within the maximum workability time.
APPLICATION: apply in at least two coats using a roller or brush. Dilution first coat 10-20%, dilution second coat 5-10%. Application conditions: temperature 10-40°C; relative humidity <80%. If air bubbles form during application, dilute the product further. If a non-slip finish is desired, sprinkle quartz sand on the surface after applying the first coat and sweep away the excess sand.
| APPLICATION DATA | |
|---|---|
| Specific weight | 1.350±0.030 kg/dm³ |
| Appearance of the dried film | semi-gloss |
| Colors | all standard colors |
| Hardener | FEDEREPO F/O comp.B |
| Mixing ratio by weight | 5:2, in volume 3:2 |
| Pot life at 20°C | 6 hours |
| Practical yield | 5-6 m²/kg |
| Hardening times at 20°C | 50% UR |
| Repaintable | minimum 12 hours maximum 48 hours |
| Walkable | 24 hours |
| Chemical resistance | 7 days |
| Indicative yield | 200/250 gr/m² |
ATTENTION
When painting particularly smooth, hard and poorly absorbent surfaces such as stoneware, tiles, ceramics, etc., it is necessary to carry out a preliminary adhesion test.
STORAGE
The shelf life of the product is 18 months from the date of the delivery note, provided that the material is stored indoors, in sealed packaging, away from heat sources and frost and at a temperature not exceeding 40°C. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable, but a quality control must be carried out beforehand on the characteristics pertaining to the application.