Description
HOW TO USE
Dilution: The product must not be diluted.
Application: The paste wax for marble, thresholds, tops, windowsills, tombstones, decorations, etc. should be applied 24 hours after the base coat of LITHOS, PRIMALAS/92, KEOS/928, KERASTONE or IDROBASE 303. The product should be applied in two coats 4-5 hours apart in a light and even manner on the floor to be polished; spread the wax with a normal synthetic sponge or with a rag or with a brush. The paste wax can also be applied with a single-brush machine equipped with a heating burner and medium-soft tampico-type brushes. Leave to dry for a few hours then polish with a dry wool rag or with a felt pad or with a single-brush machine and white or beige discs. The floor will soon acquire an unsurpassed shine. Do not use too much wax at a time; LUX wax has among its main components pure beeswax which needs to be spread on the floor in small quantities to obtain the best result. LUX wax does not leave streaks, it is repellent to humidity and dust (for its waterproofing capacity) and therefore constitutes a real nourishment for floors, an effective protection against external factors and against the deterioration of time. It enhances and protects surfaces defending them from wear.
PRECAUTIONS
During the winter, the paste wax may take on a more solid consistency. It is recommended to place the package near a radiator or immerse it in a bain-marie to soften the product. Never heat on open flames. It is recommended to mix the product before using it.
INDICATIVE COVERAGE
Approximately 6 litres per 100 m2 per coat.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 0 and 30°C, protected from direct sunlight. In these conditions the product has a shelf life of 1 year from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.