Description
HOW TO USE
Clean the surfaces with an appropriate detergent on a clean and perfectly dry surface, apply the product with a brush or roller in a regular manner, also soaking the joints well, dilute the product with the mixing ratio indicated based on the surface to be treated. On exposed bricks, apply the product on a completely dry and clean surface in two coats spaced 2-3 hours apart, avoiding any drips, following the dilution table. IMPRIM/1 has a high resistance to acid rain and atmospheric agents and a high hydrophobic capacity. The application is done by spraying or with a short-haired roller and must be carried out between +10° C and 30°C max.
PRECAUTIONS
Do not apply the product on excessively hot external surfaces and never in full sun and expect it not to rain for at least two days after the treatment.
INDICATIVE COVERAGE
Hand made Terracotta: approximately 12-15 litres per 100 m2 per coat.
Mechanical Terracotta: approximately 10-12 litres per 100 m2 per coat.
Highly porous natural stones: approximately 12-15 litres per 100 m2 per coat.
Low porous granites and marbles: approximately 8-10 litres per 100 m2 per coat.
Cement: approximately 12-15 litres per 100 m2 per coat.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 0 and 25°C, protected from direct sunlight and in a ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.