Description
HOW TO USE
Spread the product on perfectly clean and dry surfaces, cold and not exposed to solar radiation with a brush or better if with a low pressure sprayer with a 0.5 mm nozzle, or with an airless spray gun at a distance of about 20 cm from the surface. Any excess product can be removed with a white cloth moistened with the same product or with a single brush equipped with a soft disk. It is advisable to repeat the operation a few hours after applying the first coat. If used outdoors, expect it not to rain for at least 12 hours. After 6/8 hours you can proceed with the solvent-based wax finishing treatment (for example with LUX wax indoors), after 24/36 hours you can proceed with the water-based wax finishing treatments (such as FEDERCOTT/C or COVER indoors and FEDERCOTT/CA on semi-covered outdoors). Do a small sample test to check for any changes in color of the surfaces for which the product is intended.
STORAGE
The product must be stored in the original containers, perfectly sealer, at a temperature between 0 and 30°C and shielded from direct sunlight at ventilated area. In these conditions, the product has a selflife of 12 months of the date quoted in the delivery note. If the material has been stored for longer than its recommended self-life, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties.
INDICATIVE COVERAGE
7-10 litres per 100 m² per coat, depending on the absorbency of the material.