Description
HOW TO USE
Dilution: The product must not be diluted.
Application: Apply LUX COTTO wax using a rag, single-brush or brush. Make sure the application is light and uniform for effective protection combined with uniform colour. If streaks are present, they can be removed by wiping with a rag soaked in FEDERSOLV DW44. After waiting 2-3 hours, apply a second coat of LUX COTTO wax. Leave to dry and then proceed with polishing using the usual traditional methods. LUX COTTO wax has among its main components pure beeswax which must be spread on the floor in small quantities to obtain the best result. LUX COTTO wax does not leave streaks, is repellent to humidity and dust (due to its waterproofing capacity) and therefore constitutes a real nourishment for floors, an effective protection against external factors and against deterioration over time.
PRECAUTIONS
During the winter, the paste wax may take on a more solid consistency. It is recommended to place the package near a radiator or immerse it in a bain-marie to soften the product. Never heat on open flames. It is recommended to mix the product before using it.
INDICATIVE COVERAGE
6 litres per 100 m2 approximately per coat.
STORAGE
The product must be stored in the original containers, perfectly sealer, at a temperature between 0 and 30°C and shielded from direct sunlight. In these conditions, the product has a selflife of 12 months of the date quoted in the delivery note. If the material has been stored for longer than its recommended selflife, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties.