Description
HOW TO USE
Before applying waxes, make sure the floor surface is perfectly clean and dry. Dilution: Spread a layer of pre-diluted DEC on the floor to be cleaned. For light layers of wax, dilute in a ratio of 1:4 or 1:5 with water. If the wax layer is very thick, use DEC as received. Application: Leave to act for 5-10 minutes to soften the layer of wax that has dissolved; use a rag or brush or, better still, pass with a floor cleaning machine equipped with the appropriate washing discs. Vacuum up the dirt and rinse well with clean water. If necessary, repeat the operation. Rinse thoroughly several times with water and neutralize with a slightly acidified solution (e.g. water and vinegar). To remove normal waxes from floors, use DEC diluted 1:20 with water, then rinse.
INDICATIVE COVERAGE
5-10 kg per 100 m2 approximately, depending on the layers of waxy or metallic films to be removed from the floor.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 5 and 30°C, protected from direct sunlight in a well-ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.