Crystallization allows for a smooth and homogeneous surface by closing all the porosity of the stone. This treatment gives the floor an intense and long-lasting shine, increases its resistance to abrasion and black marks from shoes, making maintenance cleaning easy.
Dilution: The product is used as received.
Application: After having carried out a thorough preliminary cleaning of the floor, rinse and dry thoroughly. Shake the product well and spray a thin layer of KRISTALGLASS directly onto the floor 20 gr. per m2, making small areas at a time (about 2-3 meters). As a mechanical means, it is mandatory to use a machine equipped with a “Pad” in fine steel wool and work with the single-brush machine at 150/300 rpm insisting until obtaining a high degree of wet-effect gloss and a shiny dry finish. Do not use nylon pads as they are not suitable for this type of operation. After the treatment, recover the steel wool residues and carry out a thorough wash with neutral detergent, or with UNOPIU' and then vacuum. Finally, proceed to polish (at 300 rpm) with a white disc to increase the degree of gloss. For new floors, it is advisable to wait a month after laying before proceeding with crystallization. Never apply water or oil-water repellents before treatment with KRISTALGLASS as this would result in a disintegrating and detaching effect of the crystallizing product. KRISTALGLASS is only active on calcareous materials; always do a preliminary test to see if the product produces the desired aesthetic crystallization effect.