Description
HOW TO USE
Apply to a clean and perfectly dry surface, at most slightly damp with a wax spreader, short-haired roller, brush or low-pressure spray and wait 24 hours before applying the resin/wax treatment. For outdoor protection, we recommend, after the initial washing of the surface, waiting two or three days until it is almost dry and applying the product in 2-3 coats spaced 3-4 hours apart. The oil-water repellent protective capacity is obtained after 24/48 hours and depending on the quantity of coats of product applied. Once dry, remove any excess product from the marble, with a soft, dry cloth with a single-brush machine equipped with felts until the treated surface is restored to its original shine. No excess IDROBASE 303 product should be removed from rough surfaces, for example: terracotta, earthenware and non-polished natural stone.
INDICATIVE COVERAGE
For natural stone: approximately 8 to 12 litres per 100 m2 per coat, depending on the porosity of the material.
For very porous terracotta and earthenware: approximately 12 to 15 litres per 100 m2 per coat.
For mechanical Terracotta: approximately 10 to 12 litres per 100 m2 per coat.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 5°C and 30°C, protected from direct sunlight and in a ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.