Description
HOW TO USE
PREPARATION OF THE SUPPORT: surfaces must be clean, free from dust, oil, grease, mud, loose parts, paint and anything that could impair adhesion. Any metal supports present in the areas concerned must be free from rust, rolling slag and impurities. IMPORTANT NOTES Do not apply EPORIV 30/FR on substrates that have not been correctly prepared and treated with FEDERPRIMER, do not apply EPORIV 30/FR on damp substrates or those subject to capillary rising damp and do not expose the mixed product to heat sources.
PREPARATION OF THE SUPPORT: pour component B (resin) into component A (colored hardener) and mix with a drill at low speed, to avoid air entrapment. Once mixed, to correct the consistency, add a maximum of 0.5 L of water per package and mix again.
APPLICATION: pour the product on the floor and distribute it evenly and homogeneously with a smooth spatula. The product must be applied at a temperature between +8°C and 30°C.
INDICATIVE COVERAGE
3 Kg/m2 for 2 mm thickness.
| TECHNICAL DATA | ||
|---|---|---|
| Component A | Component B | |
| I wait | Liquid | Liquid |
| Color | Neutral | Straw yellow |
| Specific Weight | 1,5 | 1,0 |
| Viscosity | Thick paste | 300 |
| MECHANICAL RESISTANCES | |||
|---|---|---|---|
| Characteristic performance |
Method on trial |
Requirements according to EN 13813 for synthetic resin screeds | Performance of the product |
| Resistence to compression |
UNI EN 13892/2 | 5 < N/mm2 < 80 28 days | 1 day – 25.00 N/mm2 7 days – 35.00 N/mm2 28 days – 43.00 N/mm2 |
| Resistence to the bending |
UNI EN 13892/2 | 1 < N < 50 28 days | 1 day – 3.40 N/mm2 7 days – 7.70 N/mm2 28 days – 8.80 N/mm2 |
| Resistence to the tear |
UNI EN 13813 | 1 day – 2.70 N/mm2 7 days – 7.30 N/mm2 28 days – 8.80 N/mm2 |
|
| APPLICATION DATA (at +23°C) | |
|---|---|
| Mixing ratio | Comp. A : Comp. B= 10:1 |
| Dough color | White |
| Specific weight of the dough | 1,34 |
| Consistency of the mixture | Thick paste |
| Workability time at +20°C | 25 min. |
| Application temperature | From +5°C to +35°C |
| Setting time | 60 min. |
| Walkability | 12-24 hours |
| Out of Dust | 30 min. |
| Complete hardening | 7 days |
STORAGE
The shelf life of the product is 12 months from the date of the delivery note, provided that the material is stored indoors, in a sealed can and protected from heat sources and frost. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable, but a quality control must be performed beforehand on the characteristics pertaining to the application.