Dilution: The product should not be diluted (only to treat very compact and slightly porous surfaces, some “nitro” solvent or ethyl alcohol can be added to the product - i.e.: 0.800 cc ANTIQUE MARBRE + 0.200 cc “nitro” solvent.
Application: Wash the floor with the neutral detergent and rinse carefully with clear water; when the surface is perfectly dry, apply ANTIQUE MARBRE HD62 evenly using a white piece of cloth, a brush or a fine rectangular sponge (of that kind used by the tile layers), mounted on pliers, to be well wrung before going over the floor. The product can also be sprayed by an airless spray-gun with 0,51 bar nozzle and then evened up with a short-haired roller. The surface can be walked on 24 hours following treatment with ANTIQUE MARBRE HD 62. The protection action will start to be effective after 24 to 48 hours and will be complete within about 5-7 days, according to the environmental humidity degree. recommended self-life, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties. For ordinary cleaning, use a neutral detergent such as: DETERGON R3, ACHYTER or BIOSAN.
If desired, the glossy effect can be reduced going over the treated surface with Ethyl Alcohol; this operation should be carried out no later than 2-3 hours after applying the product.

QUANTITY OF USE
Approximately 10-15 litres per 100 m2 depending on the porosity of the material.