Description
HOW TO USE
PREPARATION OF THE SUPPORT: apply only to load-bearing, clean, dry surfaces free from dirt, grease, and salts. Mechanically remove all loosely adhering parts (old plaster, debris, old paint).
APPLICATION: it can be applied using airless, air-assisted spray, brush, or roller in two coats, with an average consumption per coat of 250-400g/m². Apply undiluted or diluted with 3-20% of XILO 1, depending on the chosen application method. Apply under conditions of relative humidity below 80% and at a temperature ranging from +5°C to a maximum of 40°C, on cool surfaces not heated by the sun.
NB: applying the product on surfaces with the presence of salt efflorescence or subject to rising dampness does not guarantee durable adhesion and does not exclude the formation of defects. A preliminary coat of solvent-based sealer (primer) is mandatory on particularly absorbent or non-uniform surfaces before using the product.
ATTENTION
Do not apply under direct sunlight, wind, or in the presence of fog or rain.
TOOL CLEANING
The equipment used for preparation and application must be cleaned immediately after use.
AVAILABLE COLORS
All standard RAL colors.
INDICATIVE COVERAGE
Average consumption per coat: 250-400 g/mq.
STORAGE
The product has a shelf life of 12 months from the delivery note date, provided it is stored indoors, in sealed packaging, protected from heat sources and freezing, at a temperature between +5°C and 30°C. If the material has been stored beyond the recommended storage stability duration, it may not necessarily be unusable, but a qualitative check on the applicationrelated characteristics should be carried out beforehand.
Reviews
There are no reviews yet.