Epo Out

Federchemicals > Superfici > Stoneware treatment > Detergents for removing epoxy residues > Epo Out

Epo Out

Epoxy Grout Cleaner

Specific product indicated for the removal at the end of installation of grout/filler residues from the epoxy joints used for installation and present on the surface of floor and wall covering materials.
EPO OUT is a specific product formulated with solvents of a particular type and purity, indicated for the removal at the end of installation of residues of grouting/filling of epoxy joints and joints, used for installation and present on the surface of floor and wall materials such as: ceramics, porcelain stoneware, glass and also on shiny surfaces of granite, marble, natural stone. The EPO OUT product can also be used for cleaning absorbent materials such as: terracotta, earthenware, artificial and natural stone materials. EPO OUT acts and disintegrates the polymeric component, facilitating detachment from the surface; thanks to its formula, the product is also effective on residues and fillers that are completely reticulated and dry. Do not use on wood, linoleum and synthetic coverings.

DATA SHEET

Description

HOW TO USE

Apply pure EPO OUT on a dry surface and only on the area to be cleaned, leave to act for a few minutes (maximum 10-15 minutes) and rub by hand, with a sponge or white cotton cloth or, in the case of hardened residues, use a plastic brush or hard pads until the epoxy grout residues are completely removed. Clean with non-coloured cloths. After using EPO OUT, we recommend a neutralisation wash with the product KALGRES diluted 2:8 with water. Finally rinse with clean water. Repeat the operation if necessary with the methods and methods described above.
PRECAUTIONS
Due to the many varieties of epoxy grout and the considerable operating modes where it is necessary to intervene and where the operator does not have specific experience, it is advisable to carry out a preliminary test on a small surface. The use of waterproof gloves is recommended.

INDICATIVE COVERAGE

Not quantifiable

STORAGE

The product must be stored in the original containers, hermetically sealed, at temperatures between 0 and 25°C, protected from direct sunlight and in a ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.

LIMITS OF LIABILITY

Do not release into the environment. In addition to good working practices, before applying the product, it is advisable to read the safety data sheets that are available on our website www.federchemicals.it or upon request to your local dealer, as well as the instructions on the packaging. Do not store the product at temperatures below 10°C. We decline all responsibility for the processing and for damage that may result from improper and incorrect use of the product. The indications we give on the characteristics of the product and the methods of use come from in-depth results of laboratory and technical tests.

However, since it is not possible to produce other elements of judgment when the products are used, these indications must not be considered binding and therefore do not represent a formal guarantee. The user assumes responsibility for the use of the product, taking care to previously test its characteristics. Even partial reproduction of our technical data sheets is prohibited. The data refers to the standards in force at the date of printing 2013. The company reserves the right to change them without notice.

PRODUCT FOR PROFESSIONAL USE

Contacts

Give us a call or fill out the form below and we will get back to you. We strive to respond to all inquiries within 24 hours on business days.
+39 030 3385578
+39 393 8318601