Looking Marble

Federchemicals > Superfici > Marble Treatment > Waxes > Looking Marble

Looking Marble

Special neutral and re-polishable liquid emulsified wax that acts as maintenance in the treatment of terracotta, easy to apply

LOOKING is a special non-slip wax suitable for floors in marble, non-porous natural stone, tiles, stoneware, polished granite, travertine and stone agglomerates (grit, Palladiana, terrazzo); particularly suitable for the protection of surfaces with a “glossy” finish. Floors treated with LOOKING wax remain shiny and protect themselves from wear and dirt and make cleaning and maintenance easier. Thanks to its special formulation composed of pure beeswaxes and fine carnaube hard waxes, LOOKING ensures effective and long-lasting protection and a good level of gloss. LOOKING can be washed using the product DETERGON R3, or BIOSAN and can be polished many times; it is easy to apply, simple to maintain and is also a scented wax with a fresh floral note.

AVAILABLE FORMATS

DATA SHEET

Description

HOW TO USE

Dilution: The product can be diluted in all ratios according to needs.
Application: Apply LOOKING wax to a perfectly clean and dry floor, then spread it evenly with a soft, damp cloth to save time and effort. Leave to dry for approximately 20/30 minutes, then polish with felt or a wool cloth or with a domestic polisher, to increase its shine. To refresh the shine of the surface, dilute LOOKING in portions of 2 – 3 glasses in 10 litres of water. If the floor has been previously treated with other waxes, wash it thoroughly before spreading the LOOKING wax. Basic cleaning and stripping is carried out with the water-based DEC stripper diluted 1 – 2:10 with water. For ordinary maintenance, wipe with a damp cloth with neutral detergent and, when the surface is dry, polish. LOOKING can be preceded by a basic water-oil repellent impregnating pre-treatment (for example LITHOS or IDROBASE 303).

PRECAUTIONS

The product fears frost.

INDICATIVE COVERAGE

Approximately 2-3 kg per 100 m2 depending on the porosity of the material and the intensity of the desired aesthetic effect.

STORAGE

The product must be stored in the original containers, hermetically sealed, at temperatures between 5°C and 30°C, protected from direct sunlight and in a ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.

LIMITS OF LIABILITY

Do not release into the environment. In addition to good working practices, before applying the product, it is advisable to read the safety data sheets that are available on our website www.federchemicals.it or upon request to your local dealer, as well as the instructions on the packaging. Do not store the product at temperatures below 10°C. We decline all responsibility for the processing and for damage that may result from improper and incorrect use of the product. The indications we give on the characteristics of the product and the methods of use come from in-depth results of laboratory and technical tests.

However, since it is not possible to produce other elements of judgment when the products are used, these indications must not be considered binding and therefore do not represent a formal guarantee. The user assumes responsibility for the use of the product, taking care to previously test its characteristics. Even partial reproduction of our technical data sheets is prohibited. The data refers to the standards in force at the date of printing 2013. The company reserves the right to change them without notice.

PRODUCT FOR PROFESSIONAL USE

Contacts

Give us a call or fill out the form below and we will get back to you. We strive to respond to all inquiries within 24 hours on business days.
+39 030 3385578
+39 393 8318601