Description
HOW TO USE
Dilution: it is used as received.
Application: Clean the surfaces with an appropriate detergent. Once the surface is clean and perfectly dry, apply the product evenly with a brush or roller, also soaking the joints well. For applying the product on vertical surfaces, we recommend using a spray gun (airless) in two coats (wet on wet). On natural stones with low absorbency, such as slate, use just one coat of PRIMALAS/92.
If the PRIMALAS/92 product is applied in two coats to waste, as recommended by us, its duration (both indoors and outdoors) is not less than 15 – 20 years, excluding marine areas and areas close to the sea. Before using the product, we recommend always doing a sample test on a small surface to check that the material does not change color.
INDICATIVE COVERAGE
Hand made Terracotta: approximately 12-15 litres per 100 m2 per coat.
Mechanical Terracotta: approximately 10-12 litres per 100 m2 per coat.
Highly porous natural stones: approximately 12-15 litres per 100 m2 per coat.
Low porous granites and marbles: approximately 8-10 litres per 100 m2 per coat.
Cement: approximately 12-15 litres per 100 m2 per coat.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 0 and 25°C, protected from direct sunlight in a well-ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.

