Description
HOW TO USE
Dilution: it is used as received.
Application: Clean the surfaces with an appropriate detergent. Once the surface is clean and perfectly dry, apply the product evenly with a brush or roller, also soaking the joints well. For applying the product on vertical surfaces, we recommend using a spray gun (airless) in two coats (wet on wet). On natural stones with low absorbency, such as slate, use only one coat of PRIMALAS/92. If the PRIMALAS/92 product is applied in two coats to waste, as recommended by us, its duration (both indoors and outdoors) is not less than 15 – 20 years, excluding marine areas and areas close to the sea. Before using the product, we recommend always doing a sample test on a small surface to check that the material does not change colour.
PRECAUTIONS
Do not apply the product on excessively hot external surfaces and never in full sun and expect it not to rain for at least two days after the treatment.
INDICATIVE COVERAGE
Hand made Terracotta: approximately 12-15 litres per 100 m2 per coat.
Mechanical Terracotta: approximately 10-12 litres per 100 m2 per coat.
Highly porous natural stones: approximately 12-15 litres per 100 m2 per coat.
Low porous granites and marbles: approximately 8-10 litres per 100 m2 per coat.
Cement: approximately 12-15 litres per 100 m2 per coat.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 0 and 25°C, protected from direct sunlight in a well-ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.