Description
HOW TO USE
DILUTION: SANNY KAL is used diluted 1:5, 2:10, depending on the amount of encrustations to be removed.
APPLICATION: Spread the solution on the surfaces and leave to act for a few minutes depending on the type of dirt or limescale to be removed. Use a scrubbing brush or a single-brush machine with a brown or black abrasive disc. Rinse well and collect the residue with rags or a wet vacuum cleaner. If there are any areas that are not completely clean, repeat the washing operation until completely clean or with a more concentrated solution. Rinse very well with clean water.
ATTENTION: Do not use SANNY KAL on polished marble or on materials sensitive to acids (example: black or grey slate). Always carry out a preliminary test on a small area to ensure resistance to the product. Do not use SANNY KAL on metal parts.
INDICATIVE COVERAGE
Terracotta and terracotta: approximately 10-15 litres per 100 m2 in a 2:10 dilution (depending on the type of material and the consistency of the dirt or limescale encrustations encountered).
Acid-resistant natural stones: approximately 4-5 litres per 100 m2 in a 1:10 dilution (depending on the type of material and the consistency of the dirt or limescale encrustations encountered).
STORAGE
The product must be stored in the original containers, perfectly sealer, at a temperature between 0 and 30°C and shielded from direct sunlight. In these conditions, the product has a selflife of 12 months of the date quoted in the delivery note. If the material has been stored for longer than its recommended selflife, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties.