Description
HOW TO USE
Dilute the product in cold, clean water from 1:3 to 1:5 based on the type of dirt or tenacity of any residues to be removed. To remove any extremely tenacious surface patinas that are tied to the support, the product can be used pure. It is recommended to spread the solution obtained on the surface and work the product by rubbing with a brush or a single-brush machine equipped with an appropriate disk, leave the product to act for 5 to 15 minutes during which it is advisable to continue massaging the surface; at the end of the process, remove and eliminate the residues and rinse thoroughly with water.
PRECAUTIONS
Never use on acid-sensitive materials such as: polished marble, limestone or metallic or lapped stoneware. Always do a preliminary test in a hidden corner to verify any compatibility between the product and the surface for which it is intended. Do not mix with bleach or detergents containing it.
INDICATIVE COVERAGE
Approximately 15/20 m2/l, depending on the type of dirt and dilution.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 5 and 30°C, protected from direct sunlight in a ventilated area. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.