High performance resin based diamond tools ideal for smoothing and polishing concrete surfaces.
USE: dry / wet.
MACHINERY: floor polisher
APPLICATION: for concrete and terrazzo floors. To be used after the preparation/roughing phase. Ideal for removing any scratches and polishing the surface.
ADVANTAGES: significant time and cost savings, higher gloss of the machined surfaces, easy achievement of a high degree of gloss after polishing with 800 grit (on average 55-65 points with glossimeter after the complete cycle). The 12 mm height and the new bond technology mix guarantee a long life of the tools.
| CODE | Grain | Ø inches / mm | SET No. of pieces | Segments height mm |
|---|---|---|---|---|
| SS-DW30 | 30 | 3 / 80 | 9 | 12 |
| SS-DW50 | 50 | 3 / 80 | 9 | 12 |
| SS-DW100 | 100 | 3 / 80 | 9 | 12 |
| SS-DW200 | 200 | 3 / 80 | 9 | 12 |
| SS-DW400 | 400 | 3 / 80 | 9 | 12 |
| SS-DW800 | 800 | 3 / 80 | 9 | 12 |
| SS-DW1500 | 1500 | 3 / 80 | 9 | 12 |
| SS-DW3000 | 3000 | 3 / 80 | 9 | 12 |
LIMITS OF LIABILITY
Do not release into the environment. In addition to good working practices, before applying the product, it is advisable to read the safety data sheets that are available on our website www.federchemicals.it or upon request to your local dealer, as well as the instructions on the packaging. Do not store the product at temperatures below 10°C. We decline all responsibility for the processing and for damage that may result from improper and incorrect use of the product. The indications we give on the characteristics of the product and the methods of use come from in-depth results of laboratory and technical tests.
However, since it is not possible to produce other elements of judgment when the products are used, these indications must not be considered binding and therefore do not represent a formal guarantee. The user assumes responsibility for the use of the product, taking care to previously test its characteristics. Even partial reproduction of our technical data sheets is prohibited. The data refers to the standards in force at the date of printing 2013. The company reserves the right to change them without notice.
PRODUCT FOR PROFESSIONAL USE