Acrisil

Federchemicals > Superfici > Concrete floors > Stamped concrete > Acrisil

Acrisil

ACRYLIC PROTECTIVE FOR MINERAL SUPPORTS AND PRINTED FLOORS

ACRISIL is a solvent-based protective varnish based on selected acrylic resins, with exceptional clarity and resistant to the alkalinity of the substrate. Suitable for protecting, reviving and reinforcing plasters, concrete and mineral substrates in general (exposed bricks, washed gravel, stone, etc.). resists the diffusion of carbon dioxide and therefore guarantees excellent protection against the carbonation of reinforced concrete. It can be applied on concrete with residual humidity, since the microporous structure of the film allows excess humidity to escape.

 

AVAILABLE FORMATS

DATA SHEET

Description

HOW TO USE

PREPARATION OF THE SUPPORT: ACRISIL is ready to use.

APPLICATION: it is applied directly on cement, stones, stucco, bricks, concrete. ACRISIL can be applied in two coats by air spray, airless spray, roller or brush. The nozzle must be 1.9 – 2.2 mm and the pressure 4 atm. The application conditions are the following: temperature above 5°C and relative humidity <85%. Do not apply ACRISIL in the presence of high atmospheric humidity, beating sun or strong wind.

INDICATIVE COVERAGE

80/125 ml/m2 per applied coat.

STORAGE

The shelf life of the product is 12 months from the date of the delivery note, provided that the material is stored indoors, in a sealed can and protected from heat sources and frost. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable, but a quality control must be performed beforehand on the characteristics pertaining to the application.

LIMITS OF LIABILITY

Do not release into the environment. In addition to good working practices, before applying the product, it is advisable to read the safety data sheets that are available on our website www.federchemicals.it or upon request to your local dealer, as well as the instructions on the packaging. Do not store the product at temperatures below 10°C. We decline all responsibility for the processing and for damage that may result from improper and incorrect use of the product. The indications we give on the characteristics of the product and the methods of use come from in-depth results of laboratory and technical tests.

However, since it is not possible to produce other elements of judgment when the products are used, these indications must not be considered binding and therefore do not represent a formal guarantee. The user assumes responsibility for the use of the product, taking care to previously test its characteristics. Even partial reproduction of our technical data sheets is prohibited. The data refers to the standards in force at the date of printing 2013. The company reserves the right to change them without notice.

PRODUCT FOR PROFESSIONAL USE

Contacts

Give us a call or fill out the form below and we will get back to you. We strive to respond to all inquiries within 24 hours on business days.
+39 030 3385578
+39 393 8318601