Description
HOW TO USE
PREPARATION OF THE SUPPORT: EXTRA MATT must be applied on perfectly clean and dry surfaces, free from oil, grease or dirt in general and on healthy, compact and completely mature supports in the case of surfaces with a cementitious matrix.
PREPARATION OF THE SUPPORT: EXTRA MATT is ready to use and does not require dilution.
APPLICATION: shake before use, then apply the first coat with a short-haired roller (short-haired mohair rollers, specific for polyurethane finishes) or wax spreader or by means of an airless turbine kit. Leave to dry for a minimum of 40 minutes (at +20°C), then apply the second coat crossing it perpendicularly to the first.
In case of wear, it will be possible to partially regenerate the film by applying a coat in the points of greatest wear or, if possible, proceed with a spray-cleaning system. Do not apply when the temperature of the support is lower than +10°C or higher than +30°C, or with relative humidity higher than approximately 70%, as these conditions could affect or slow down the catalysis of the product too much.
STORAGE
The product must be stored in its original, hermetically sealed containers at temperatures between 10°C and 30°C, protected from direct sunlight and in ventilated areas. In these conditions the product has a shelf life of 12 months from the date of the delivery note, if the material is kept for storage beyond the recommended shelf life, it will not necessarily be considered unusable but a prior product check must be carried out.
INDICATIVE COVERAGE
Consumption varies according to the porosity of the surface to be treated, on average we can consider a use of 30 to 300 g/m².