Description
HOW TO USE
PREPARATION OF THE SUPPORT: the substrates to be coated or treated must be healthy, compact and free of crumbly and/or flaking parts. Clean the substrate from dust, residual oils, pre-existing paintwork and in any case from anything that could compromise adhesion. Then wash the surface with a jet of pressurized water and detergent
industrial, finally rinse with clean water.
PREPARATION OF THE SUPPORT: pour component B into the container of component A and mix the two components carefully with a low-speed drill until you obtain a smooth, lump-free product.
APPLICATION: apply with a roller in a homogeneous manner and in a uniform thickness, on the adequately prepared and necessarily still damp support. Avoid the accumulation of stagnant water resulting from washing the floor and, if necessary, vacuum with a liquid vacuum cleaner. Immediately after application, the fresh surface of FEDERPRIMER OIL must be dusted with fine quartz 0.1-03 mm to allow perfect adhesion of subsequent resin coatings.
| TECHNICAL DATA | |
|---|---|
| Pot life: approximately 60 min. at 20°C | about 60 min. at 20°C |
| Mixing ratio: | comp.A: comp.B = 89:11 parts by weight |
| Specific weight of the dough: | 2.00 (A+B) |
| I wait: | dense fluid |
| Color: | grey (comp.A) black (comp.B) |
| Pot life at +20°C: 40 | 40 min. |
| Minimum operating temperature: | +5°C |
| Adhesion to dry concrete: | >2.5 Mpa |
| Adhesion to wet concrete: | > 1.5 MPa |
| Walkability: | 12 hours |
| Complete hardening: | 7 days |
| Product yeld | 400-500 gr/m2 |
| Packages | 13.35 kg part A 1.65 kg part B |
INDICATIVE COVERAGE
400-500 gr./m2.
STORAGE
The shelf life of the product is 12 months from the date of the delivery note, provided that the material is stored indoors, in a sealed can and protected from heat sources and frost. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable, but a quality control must be performed beforehand on the characteristics pertaining to the application.