Description
HOW TO USE
The preparation of the surfaces to be treated is very important for the success of the work we are going to do; first of all, it is advisable to thoroughly clean the surface to be sanded from all construction site residues such as: gravel, nails, etc., after which apply 30 to 60 grams of product (2/3 tablespoons) per square meter; wet the powder until it has a milky consistency, then place the traditional sanding machine equipped with felt or with a weighted single-brush machine on the wet powder and work the surface for a few meters at a time without ever letting it dry. A patina of used product remains on the floor; it is advisable to remove the patina from a small area using a rag, in order to check the degree of polish obtained and, if necessary, repeat the operation. At the end of the polishing treatment, remove all the patina, using a neutral detergent such as: DETERGON R3, BIOSAN, it is recommended to rinse very well with clean water.
PRECAUTIONS
It is recommended to rinse very well with clean water.
INDICATIVE COVERAGE
From 30 to 60 grams of product per square meter.
STORAGE
The product must be stored in the original containers, perfectly sealer, at a temperature between 0 and 30°C and shielded from direct sunlight. In these conditions, the product has a selflife of 12 months of the date quoted in the delivery note. If the material has been stored for longer than its recommended selflife, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties.