Description
HOW TO USE
The surface has to be cleaned before the beginning f the treatment, in order to remove residues, after that apply from 30 gr to 60 gr (2 or 3 spoons) of product per square meter; wet the powder to get a milky texture, then place the traditional surface equipped with a felt pad, or use a weighting mono-brush machine and work a few meters at time, the surface has always to be wet. A thin layer of the used product remains on the floor; we suggest removing a part (using a cloth) in order to check the grade of finish reached and if is necessary repeat the operation. At the end of the polishing treatment, it is recommended to remove all patina and wash with a neutral detergent such as DETERGON R3 or with a water-repellent detergent like K-SOAP, in order to obtain a clear surface with excellent temporary resistance to dirt, with clean and protected joints, thus making daily maintenance easier.
WARNINGS
Before any application, do a preliminary test. The MSDS is available upon request.
HANDLING AND STORAGE
The product must be stored in the original containers, perfectly sealer, at a temperature between 0 and 30°C and shielded from direct sunlight. In these conditions, the product has a selflife of 12 months of the date quoted in the delivery note. If the material has been stored for longer than its recommended selflife, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties.
Reviews
There are no reviews yet.