Description
HOW TO USE
The surfaces to be treated must be clean and dry. On floors: spray small quantities on the surface and polish with a low-rev single-brush machine (160-200), equipped with a white 3M nylon pad, working on 5-6 m2 at a time. Move the single-brush machine with a uniform rotary motion and polish for a few seconds per square meter until the surface is shiny. Use several discs to prevent them from getting too wet; polishing occurs when drying, discs left to dry for a few minutes can be reused immediately. The floor can be maintained by washing it with a neutral detergent such as: BIOSAN or DETERGON R3. Manual application: apply a small amount of product at a time on a white cotton pad, spread evenly, then leave to act for a few seconds and polish by rubbing with a dry cloth.
INDICATIVE COVERAGE
Consumption varies depending on the type of surface and the desired level of gloss. On average 1 litre for approximately 20-45 m2.
STORAGE
The product must be stored in the original containers, hermetically sealed, at temperatures between 5 and 30°C, protected from direct sunlight in a well-ventilated area. In these conditions the product has a shelf life of 24 months from the date of the delivery note. If the material has been kept beyond the recommended shelf life, it is not necessarily unusable but a quality control must be performed beforehand on the characteristics relevant to the application.