Description
HOW TO USE
PREPARATION OF THE SUPPORT: after having densified the surface and sanded it with resin abrasives up to 800 grit, it is advisable to remove any residual surface dust by vacuuming or lightly washing with a washer-dryer.
PREPARATION OF THE SUPPORT: the product must be used pure.
APPLICATION: on a dry and clean surface, apply SUPER SHINE evenly with a microfiber pad and taking care to distribute a light layer, leave to dry for 60 minutes. If necessary, you can repeat this step, trying to avoid applying excessive quantities since an excess of product would not harden correctly, thus creating unsightly results and whitening.
Once dry (at least 60 minutes) we recommend using a high speed polisher at 2000/2500 rpm, possibly using a natural bristle pad, in order to significantly increase the shine of the treated surface through a greater thermal reaction. Complete drying generally takes 1 or 2 hours. We recommend avoiding washing the surface for a period of 7 days after the final treatment in order to avoid any unsightly reactions, since the treatment will reach maximum cross-linking during that period.
The treatment is to be considered for internal use, do not apply at temperatures below 10°C and, in case of very hot temperatures, it may be useful to moisten the surface with water beforehand to prevent the product from drying too quickly. If the product is applied in a very cold or humid environment, these conditions will slow down the drying of the product; if after an hour from application the flooring is too wet, it is advisable to wash the surface with an automatic floor cleaner to remove excess product.
ATTENTION
Avoid contact with surfaces for which the product is not intended. The product is sensitive to frost. Make sure you have the latest update of the technical data sheet and safety data sheet; please read the information contained therein before using the product.
INDICATIVE COVERAGE
From 15 to 40 m2 with 1 litre, variable according to the porosity of the concrete surface.
STORAGE
The product must be stored in the original hermetically sealed containers, at temperatures between 10°C and 30°C, protected from direct sunlight and in ventilated areas. In these conditions the product has a shelf life of 12 months from the date of the delivery note, if the material is kept in storage beyond the recommended stability period it will not necessarily be considered unusable but a preventive check on the product must be carried out.