Ultra Shine PRO

Federchemicals > Superfici > Concrete floors > Polished concrete > Polishes > Ultra Shine PRO

Ultra Shine PRO

LITHIUM-BASED PROTECTIVE POLISHING TREATMENT FOR CONCRETE

ULTRA SHINE PRO is an aqueous solution of lithium silicate formulated for the mirror finishing treatment of previously densified and smoothed concrete surfaces.
ULTRA SHINE PRO is a nano lithium and UV filter based finish specifically designed for use on industrial or commercial concrete surfaces subject to high stress due to: forklift traffic, high pedestrian traffic or the presence of chemicals in general. The product hardens the concrete and after polishing, in addition to intensely increasing the shine of the treated floors, it significantly facilitates maintenance by reducing costs. ULTRA SHINE PRO is a solid breathable cortical finish that combines the protection of a high penetration thickener and the pleasant visual impact of a non-film-forming and non-yellowing glossy coating.
ULTRA SHINE PRO hardens quickly, is easy to apply and therefore ideal for use in structures that require maximum protection and minimum downtime, indisputably ensuring high technical performance, excellent resistance and a greater barrier effect to the treated surfaces. The product reacts with the surface to which it is applied, giving rise to a long-lasting chemical bond and ensuring long-term protection thanks to the high active content of solid materials with a reduced molecular size combined with a lower viscosity compared to traditional treatments. The product also guarantees superior penetration into the porosity of the surfaces, offering uniformity of surface treatment after mechanical polishing.

 

AVAILABLE FORMATS

DATA SHEET

Description

HOW TO USE

PREPARATION OF THE SUPPORT: after having densified the surface and smoothed it with resin abrasives up to 800 grit, it is advisable to remove any residual surface dust by vacuuming or lightly washing with a washer-dryer.

PREPARATION OF THE SUPPORT: ULTRA SHINE PRO is ready to use and does not require dilution.

APPLICATION: on a clean and dry surface, apply evenly with a microfibre pad and taking care to distribute a light layer of ULTRA SHINE PRO, leave to dry for at least 60 minutes. If deemed necessary, you can repeat this step, trying to avoid applying excessive quantities, as an excess of product would not harden correctly, thus creating unsightly results and whitening. Once dry (at least 60 minutes), we recommend passing over with a high-speed polisher (2000/2500 rpm) using a natural bristle pad to significantly increase the shine of the treated surface. Once dry, the floor will be ready for pedestrians to walk on. Complete drying generally takes 1 or 2 hours. We recommend avoiding washing the surface for a period of 7 days after the final treatment in order to avoid any unsightly reactions. The treated surfaces will reach maximum technical resistance within 7 days.
For the ROUTINE MAINTENANCE We recommend surface sweeping and subsequent washing with a washer-dryer and pH-neutral detergent CEMENT CLEANER in concentrations appropriate to the type of dirt or as specified in the technical data sheet.

ATTENTION

It is recommended to carry out a test on a small portion of the floor to be treated to ensure its suitability for the application and that the results are as desired. Allow the surface to dry before carrying out checks and proceeding with the application.

INDICATIVE COVERAGE

From 15 to 40 m2 per litre, depending on the porosity of the surface.

STORAGE

The product must be stored in the original containers, hermetically sealed, at temperatures between 10°C and 30°C, protected from direct sunlight and in ventilated areas. In these conditions the product has a shelf life of 12 months from the date of the delivery note. If the material is kept in storage beyond the recommended shelf life, it will not necessarily be considered unusable, but a preventive check on the product must be carried out.

LIMITS OF LIABILITY

Do not release into the environment. In addition to good working practices, before applying the product, it is advisable to read the safety data sheets that are available on our website www.federchemicals.it or upon request to your local dealer, as well as the instructions on the packaging. Do not store the product at temperatures below 10°C. We decline all responsibility for the processing and for damage that may result from improper and incorrect use of the product. The indications we give on the characteristics of the product and the methods of use come from in-depth results of laboratory and technical tests.

However, since it is not possible to produce other elements of judgment when the products are used, these indications must not be considered binding and therefore do not represent a formal guarantee. The user assumes responsibility for the use of the product, taking care to previously test its characteristics. Even partial reproduction of our technical data sheets is prohibited. The data refers to the standards in force at the date of printing 2013. The company reserves the right to change them without notice.

PRODUCT FOR PROFESSIONAL USE

Contacts

Give us a call or fill out the form below and we will get back to you. We strive to respond to all inquiries within 24 hours on business days.
+39 030 3385578
+39 393 8318601